VoIP Anywhere

Self Install Guide

Getting Started

What's included:

• VoIP Anywhere Telephone Adapter
• Ethernet Cable
• AC Power Adapter

Equipment you will need:

• Broadband Connection: DSL, cable modem, or other high-speed Internet connection
• Router: To share your broadband connection with more than one device
  (If you don't already have a router, they are available at most computer and office supply retailers for around $40)
• Traditional Analog Telephone

To use enhanced features, you will need:

• Computer 
•  Web Browser: MS Internet Explorer (version 4.x or higher) or Netscape Navigator (version 4.x or higher)

Installing VoIP Anywhere

Telephone Adapter:

1. Remove the VoIP Anywhere equipment from the shipping container.
2. Insert the Ethernet cable provided into the LAN port.
3. Connect the other end of the Ethernet cable into an open port on your router.
   
   Figure 1: VoIP Anywhere Telephone Adapter
   
   From left to right: Phone port, Power Connections, ACT and Status Light, LAN Port
   
   
4. Insert the telephone cable into the Phone port of the VoIP Anywhere Telephone Adapter.
5. Connect the other end of the telephone cable to a traditional analog telephone.
6. Insert the appropriate end of the power cord into the VoIP Anywhere Telephone Adapter. Plug the other end into a power outlet or surge protector.
7. The green STATUS Light will blink for up to 1 minute. Once the light stops blinking, you are ready to start making calls.
   
   Figure 2: Network Connections
   
   

NOTE: The instructions in this Quick Start Guide do not consider all types of connections. For more information and troubleshooting tips, go to www.bullseyetelecom.com\products\VoIP\VoIPAnywhere/FAQs.

If you need additional assistance, call BullsEye

Customer Service at 877-638-2855.

Troubleshooting and Assistance

If you are experiencing issues with your service, please review these common troubleshooting solutions. If you need additional assistance, please contact BullsEye Telecom Customer Service at 877-638-2855.

Please be sure to tell your support agent what troubleshooting solutions you have attempted.

Trouble Shooting
ISSUE	SOLUTION
No dial tone	Check all connections to the VoIP  Phone Adapter.  Reboot your equipment.
Phone does not ring	Check all connections to the VoIP Phone Adapter. Make sure the ring volume on the phone is properly adjusted. Reboot your equipment.
Fast busy signal	Reboot your equipment.
If service has not been restored after following the instructions above, contact BullsEye Technical Support	BullsEye Technical Support 1-888-825-2254.